In this video we show you how to adjust the top fixtures on your garage door to reduce the gaps between the door and the jamb.
Garage door track alignment.
There are two ways that you can adjust garage door track.
You can adjust the door tracks yourself and avoid further damage to your door.
For other garage door repair issues see troubleshooting garage doors or garage door opener problems.
Then move each track until there is a 1 4 inch of space between the bottom of the garage door and the top of the crown molding.
A gap might appear between the door and the rubber molding.
The door runs are housed in a garage door track one on each side of the garage door.
Tracks that are out of adjustment can wear out rollers quickly and in some case will cut through door spring cables.
The door might rub against the rubber molding.
To adjust vertical garage door tracks start by loosening the lower track brackets using a screwdriver or wrench.
This guide will teach you how to adjust an uneven garage door to keep it running safely and smoothly.
The garage door might bind which in turn makes it hard to open and close.
Here are the steps to follow if your garage door is binding.
Using a screwdriver loosen the screws which hold the tracks in the garage door frame.
Adjusting the tracks for a binding garage door step 1 loosen the track screws.
When the garage door track is out of alignment it causes some issues but the most common ones include.
1 you can align the track with the door itself so that the rollers work properly.
Now you can align the track so it is perfectly vertical by tapping it at the bottom with a rubber mallet.
An out of balance garage door can close too quickly creating a potential hazard for kids and pets and placing unnecessary strain on the door s parts.
Buy garage door top fixtures.
Garage doors roll up and down on a set of door tracks.
If your garage door is binding.
In extreme cases the door can even come out of the track.
If you ve had your door for a while or are in and out of it a lot it can easily end up out of alignment.
So here is a quick how to guide that will show you how to adjust the track.