Oxy Acetylene Vs Tig For Auto Body Sheet Metal

The tig is a non starter for hot bending annealing normalizing 4130 brazing silver brazing and soldering.

Oxy acetylene vs tig for auto body sheet metal.

Oxy fuel or oxy acetylene welding are gas welding procedures that were invented in the early 1900 s. In between are the oxy acetylene wire feed and mig welders. Oxy acetylene over both tig and mig. Of these mig is the best because of its smooth arc and adjustable power.

Panel or fender flare on a car i use either oxy acetylene gas welding or wire feed mig welding in that order of preference. In order to master the perfect mig welding auto body there are several things that you need to take into account. The inert gas from the gas bottle is constantly fed through the hose of the gun along with the wire. So if you need to fix that metal fence or boat you better hope there s not the slightest breeze blowing.

And forget trying to use your tig in windy conditions. Gas welding is my first choice because the metal stays fairly soft and workable and. The most commonly used shielding gas for sheet metal welding is c 25 25 co2 and 75 argon mixture. And this welding process is still very popular today mainly because it does not require much equipment and does not require power.

Oxy acetylene welding and sheet metal. This is mostly due to ofw s durability and controllability. Note the simple bends made with a brake to fit the side plate. If you can get your tig out to the yard to fix them.